|
|
|
|
 |
ATRS
Detachable Bottom
Metal
CNC machined
from aluminum billet, milspec type
III hardcoat annodized. Accepts Accuracy
Intl mags. Includes one
magazine.
Models to fit Rem 700 LA
and SA rifles. |
$550
installed |
|
|
ATRS Bolt
Knobs
CNC machined
aluminum, milspec hard annodized. |
$50
$125 installed
|
|
|
ATRS Rem 700 Recoil Lugs
These are
extra thick CNC machined stainless recoil lugs
for the
Remington 700
rifle. |
$60 |
|
|
ATRS Rem
700 Rail
CNC
machined stainless steel to fit Rem
700 SA and LA
rifles and Savage SA rifles. Rails are ambidextrous to
fit left and right handed actions.
20 MOA std |
$175 |
|
|
ATRS Picatinny +25
MOA Rail for Sako TRG42 &
TRG22
CNC machined
stainless steel, these rails slide onto the
factory dovetail and screw into the factory
mounting holes for maximum rigidity.
Factory holes are metric and these rails are
supplied with 6x40 screws and tap to chase out the factory metric
thread by .003". |
$250 |
|
|
ATRS Gill Brake and Mini-Gill
Brake
The most
efficient muzzle brake for use on large calibre
magnum rifles and was designed specifically for
prone shooting to control dust
signature. This is the brake we install on
every custom .338 Lapua
rifle we make. We have also created
a mini version of the Gill Brake designed
for smaller calibre rifles. CNC
machined from 17-4 stainless, each brake is hand
fitted to your rifle for maximum performance and
accuracy. |
$350 installed |
 |
Muzzle Brake for AR15
Computer
designed and tested to maximize recoil reduction
and minimize flash generation. (.223 calibre
only) |
$120 |
 |
Steyr HS50
Gill Brake
Our famous ATRS
Gill Brake is now available for the Steyr HS 50
calibre rifle. The Gill Brake is the most
efficient type
of brake for these big rifles. Specifically designed for
prone shooting it will not create a large dust
signature. These brakes have proven 25% further reduction from
the factory Steyr brakes and are not nearly as
abusive to the shooter. |
$450 |
|
|
Fwd NV Mount for AICS
and McMillan A5 stocks
Mounts nightvision forward of the scope.
Includes twin side accessory rails. Milspec
hard annodized 7075 aluminum construction combines
strength with light weight. Bolts
directly to the stock for maximum
rigidity. Does not touch barrel.
Requires installation in-house. |
$650 installed |
 |
AT15
Billet Upper Receiver
Precision machined from solid
7075 aluminum. Machining held to extremely
tight tolerances. Compatible with most
Mil-Spec components. Comes with forward
assist and ejection port cover already
installed. The perfect compliment for
those wanting the most precisely made upper
available.
|
$425 |
|
.JPG)
|
AT15 Lower
Receiver
This is the highest quality AR
lower available in Canada. CNC
machined from billet 7075 aluminum it includes
features not found on any other AR
receiver. The magwell is EDM'd for
flawless feeding and magazine fit with the
Magpul PMag and features a generous flare for
faster, easier mag changes. An adjustable
spring loaded tensioning device is placed under
the rear pin to ensure the tightest possible fit
between the upper and lower receivers. The
finish is Mil-Spec Type III hardcoat
anodizing. A couple of changes we have
made to our lower receivers are the rear
takedown spring and detent are captured, as well
as safety spring and detent are captured.
Gen3 lowers are only shipped as an
assembled lower and are available with standard
Mil-Spec LPK, RRA two-stage trigger or Timney
match trigger. |
w/Mil-Spec LPK
-
$635
w/RRA
- $835
w/Timney -
$875
Dealer Pricing
Available |
